Advantages of diamond wire saw for stone quarrying& mining

Publish date:2022-08-26 08:45:11 Article From:Linxing Diamond Tools Clicks:

Diamond wire saw is a kind of mining tool commonly used in mining at present, which is mainly used in the mining of marble mines and granite mines. What are the advantages of mining wire saws compared to other mining methods? Let's find out:

1: High security.

In the process of mining, blasting is the earliest method used. This method not only has a high risk factor, but also has a very low mining efficiency. Later, people discovered other mining methods, such as row drilling and expansion agents, but these methods are too inefficient for those who need large blocks of stone or for overall mining, so people still use fixed-point blasting for mining of mines. In addition, this method cannot guarantee safety. So in order to better ensure the safety of people and efficiency of mining stone work, diamond wire saw is a better choice. During the cutting process, it is generally necessary to ensure that no humans or animals are left within the cutting radius of 25 meters, so as to avoid any safety accidents. The diamond wire saw is used to cut the stone with a higher mountain and a larger cutting surface, and the safety is particularly obvious.

Diamond Wire Saw, Mining Wire Saw, Diamond Wire Saw for Stone Mining

2: Environmental protection.


With the increase of carbon emissions worldwide and the destruction of the environment, human beings are currently facing severe environmental problems. China has continuously promoted the development of environmental protection since 2000. The diamond wire saw has its own advantages in environmental protection, mainly in the following points:

1)Low noise. 

During the mining process of the wire saw machine, the sound of the motor running is far less than the noise produced by other mining methods. For example, the noise generated by blasting, hole rowing and circular saw cutting is much higher than that of wire saw mining.


2)Low noise.

During the mining process of the wire saw machine, the sound of the motor running is far less than the noise produced by other mining methods. For example, the noise generated by blasting, hole rowing and circular saw cutting is much higher than that of wire saw mining.


3)Small dust.

In the mining process of the wire saw machine, because it is cutting with water, most of the dust will flow into the cooling pool with the cooling liquid. Compared with other cutting and mining methods, such as blasting mining and even circular saw mining, this mining method not only has the smallest cutting seam, and the dust generated is also the smallest.

4)Environmental protection of solid waste discharge.

Stone powder is a very special substance. Once the stone powder flows into the farmland, it will cause the farmland to be barren. Therefore, the treatment of stone powder garbage is extremely important. For wire saw mining, a large amount of stone powder will flow into the cooling pool together with the cooling water, which ensures the treatment of water resources in the later stage.

Granite Mining, Granite wire saw rope

3: Wide range of application.


The mining wire saw is flexible and diverse, such as vertical, horizontal, and oblique cutting. And the cutting angle can also be changed in time according to the situation. The diamond wire saw can be mined in a limited space and is a powerful tool for opening up a mining platform, so the wire saw is also suitable for poor mining and construction environments. The diamond wire saw can cut some special occasions, such as underwater cutting (pier or bridge pier cutting). The wire saw has a large cutting depth, which can make up for disadvantage in some places where other cutting tools such as mine quarry cutter cannot be used, such as cutting higher, deeper and longer blocks.

4: High yield.

The sawing surface is flat, the block yield is high and the secondary damage of the ore body will not be caused when the diamond wire saw is used. It can be reasonably mined according to the distribution of the ore body cracks, without causing waste of resources.

5: High cutting efficiency.

The mining efficiency of double blade mining machine combined with the wire saw is 98.6% and 20.0% higher than that of the quarry cutter combined with the gun and the quarry cutter combined with the artificial bottom lift respectively. Of course, if the wire saw machine is used alone for mining, it is more efficient than traditional manual mining, especially for large-scale stone mining.