1.Noise problem: in production process of the diamond segment, the two processes of noise are post-processing of cold press and deburring. When in cold press, due to cold press punch head will quickly become a nodule through the impact force, the noise of this process sometimes reaches 80 decibels,which is a medium noise. In terms of environmental problem, try to isolate the cold press as much as possible to reduce the possibility of higher decibel noise by resonance. In the post-processing after the sintering of the segment, the machine should be placed in a relatively open space as much as possible, which can greatly reduce the adverse consequence of noise.
2.Dust pollution:The problem that dust will face in the process of mixing powder at the front end of segment production is because the sealing performance of the mixer is not good enough during the mixing process, or the equipment is aging, Or when the powder material is flying when discharging or reclaiming the material, it is generally necessary to purchase professional environmental protection equipment to deal with the dust on site, so as to avoid causing a greater health impact on people. Of course, in order to control the dust pollution in factory, the mixing material should be kept in a closed environment as much as possible, but the layer height can be higher to avoid excessive dust concentration.
3.Water pollution: Water is rarely used in the production process of diamond segment , but when cleaning some equipment or cleaning itself, it is inevitable that some powder will be discharged into the sewer,However, the powders contained in the powder include common metal powders, including iron powder, copper powder, tin powder, aluminum powder, manganese powder, cobalt powder, carbon powder, emery powder, etc. There are also some rare metals such as zinc powder, zirconium powder, etc., which will have an impact on domestic water, so when draining water, it should be detected and treated in time.
4.Hazardous waste pollution: although most of the pollution is the mental pollution of diamond segment , there will also be some hazardous wastes, such as copper-containing hazardous waste metal products, and some chemical products, such as very corrosive metals or metals. The disposal of these hazardous wastes must be notified to the relevant processing manufacturers for processing and reporting, otherwise there will be corresponding penalties.
Then in the process of using, the diamond segment also has many environmental protection requirements. Let's take a look at it.
1.The thickness of diamond segment: the higher the thickness of diamond segment, the greater the loss to the stone. At present, the demand for thinner and thinner segment is the development trend of the diamond industry in the future. A thinner segment representitive that the sharpness of the segment will increase, and it also means that the strength of grinding will also increase in the future. Therefore, the development of thinner and sharper cutter heads with stronger structure is a development problem faced by diamond cutter heads in the future.
2.Disposal of waste diamond segment problem : The waste segment needs to be recycled . There is a large amount of metal in the segment . These metals are separated and then made into powder, It also achieves the result of waste recycling, but beware of purchasing diamond powder for secondary use, there are very large changes in stability, and there will be great variables in the cutting process.
