Diamond segment

Large diamond segments are usually tools used to cut stone blocks. They are mainly welded to diamond saw blades. Through rapid mechanical rotation and walking, the saw blades polish the stone, thereby allowing the stone to be cut. Large segment is a special kind of tool, mainly used for gantry cutting, multi-slice cutting, multi saw, circle saw and other machinery. The stone processing relies on the saw blade, and the saw blade relies on the small front The segment is also the main cutting tooth of the saw blade, so the quality of the large diamond segment also determines the efficiency of stone processing.

Let’s take a look at the production process of large diamond segments. First of all, we must understand that large segments are not products of the same standard. For different stones, different machines, and different regions, customers’ requirements for segments are constantly changing. For example, European customers, because European stone is often more expensive and labor costs are more expensive, so they pay attention to the stability and efficiency of stone cutting, and also pay attention to the thickness of the cutting segment. They often choose ultra-thin saw blades for processing, and choose The combination of extremely sharp segments can save stone and improve processing efficiency. In Europe, block cutting is moving towards thinner and thinner. In India, customers are concerned about the efficiency, lifespan and product price of the segment. They hope to find products with higher cost performance. Therefore, the segment design is conservative and does not care about the waste of stone.



Secondly, after clarifying customer needs, design the formula for the customer segment. Customers who require high sharpness can appropriately improve the diamond grade, or change the appearance of the segment, or change it to a multi-layer design, etc., and then target customers with long life requirements , You can appropriately increase the diamond concentration, or increase the segment height, etc. to deal with it.

Then, the large segment production process is more cumbersome, mainly divided into ingredients, mixing, cold pressing, hot pressing sintering, demoulding, trimming, cutting edge and bottom grinding, finally packaging, and finally the product is shipped to the customer.

Finally, the large segment is welded to the saw blade. Through cutting, there will be some feedback. Through these feedback, we help our design engineers to improve the segment formula. Through the above rounds of running-in, we will finally meet the customer's requirements and expectations.



Large diamond segments are non-standard products. Because there is no standard, customers will have various problems during use. For example, the efficiency and life of large segments cannot meet expectations. At this time, we must communicate with the manufacturer. After continuous and patient testing, satisfactory results can be achieved. All in all, the quality of the segment lies in continuous debugging, and finally a product of stable quality appears. If a large diamond segment produced by a certain manufacturer is good or bad, this is an unstable performance of the product. Such a manufacturer must replace it as soon as possible.

Linxing diamond segment-We only make stable segments. For many years, once Linxing’s diamond segment is successfully tested, there will be basically no deviations in segment life and efficiency. This is due to the quality control management model adopted by our company. Our large diamond segment is your better choice.