The character of good quality diamond segments

There are still have a obvious difference between the high quality diamond segments and the bad quality diamond segments, such as effeciency, good quality diamond segments have a very good cutting effeciency ,while the bad one will have a very slowly cutting effeciency, even have the problem of drop the teeth, for a stone factory, using the bad quality diamond segment is not only will effect the effeciency of processing, but also will destory the stone or the machine, even more will have the production accident. So that every stone factory should choose a good quality diamond segment. Therefor, through this article, we will introduce the good quality diamond segments with several characteristics, when people choose the diamond segment have more comparision and reference, then they can choose a more  fitable diamond segment.

First: High cutting effeciency, during the process of stone production, the cutting process is a very important process. The selection of a diamond segments must first be reflected in the efficiency. If the cutting effeciency is very lower,  the feeding speed and the plunge rate is too slowly, which will lead to the production of plates. that will directly decrease the effeciency of producing slab,  The efficiency of the cutting tool is reduced, thereby increasing production costs,  such as workers’ wages, the utilities, etc. Moreover, it will also directly effect the subsequent procedure, so in the cutting process, the most important thing is effeciency, without cutting effeciency, the diamond segment is absolutely not a good diamond segment.



Second: long cutting life, one set of segments, if the cutting life is longer, that will be also save the processing cost, such as brazing cost, labor cost, cutting edge of saw blade, testing, etc. So for a stone factory, the segments can cut more stone with more square meter is also very important under the same cutting effeciency.

Third: The design of the segment shape is more reasonable.  The shape of the segment mainly increases sharpness, increases the water groove to increase the cooling effect of the cooling liquild,  and it is easy to remove chips. It is a good quality segments  if the segment’s shape can satisfy with above function, otherwise, the segments will have various problem due to the cooling problem and chip removing problem.

Fourth:The segment with fast grinding speed, this character is related to the effeciency of the segment, while the grinding speed not only reflected in the cutting effeciency, but also reflected in the rotational speed, if the segment’s grinding speed are too fast, then the blade in the cutting process no need high rotational speed, it also can cut well in cutting stone, and because the grinding speed are fast , the stone will not easy to be chipping, and the slab will not easy to be broken.

Fifth: The excellent desigh of high quality diamond segment is very reasonable, if you choose one edged segment, we will find the segments with obvious diamond exposed on the surface of the segments, and also with obvious tailing behind,such a segment structure design will make more stable and sharp segment with quality.



Sixth: A good segment will adopt high cobalt copper based formula, such a segment has a yellowish color, is not easy  to rust and  the agglomeration are more firm, more better for cutting precious marble. Usually the cheap segment looks whitish in color, and more easy to be rust and cause stone pollution.

General speaking, a good diamond segments can be refected on from effeciency, lifespan, stable, design, outlook, etc. Anyway, the better way is to buy one set of segments to test it seriously, and constantly adjust the formula and design.  then achieve more higher standard, and satisfy the requirements from various stone processing factory.