Found 14 messages related to 「Segment Production」
Why The Diamond Segments Have Been Processed Into Vavious Shape?
As the shape of the diamond segments continues to increase, people find that the different shapes of the diamond segments directly affect the diamond saw blade sawing performance and has an extremely important impact on improving the life and sharpness It can be said that the shape of the diamond segments not only improve its outlook, but also have a great significance in terms of practicability
Production process of diamond segment for stone processing
In the process of stone processing, especially in the cutting environment, a diamond segment is needed The segment is fixed on the saw blade substrate by high-frequency welding to form a diamond saw blade for cutting stone The segment is especially used in the stone cutting industry It is widely used in mining, block cutting, slab cutting, rough grinding, drilling, grooving, edging and other technological processes However, people know the production process of segment products more superficial, this article introduces the production process of the segment, so that everyone understands the relevant knowledge of the diamond segment, so that people can better choose the diamond segment
How is the diamond segment produced?
Diamond segment production process is actually very cumbersome, especially special custom diamond segment, need to know the hardness of the customer cutting object, wear resistance after the formulation of the deployment, in order to carry out production, and the production process needs to be constantly adjusted to produce a better diamond segment product
Jiangxi diamond segment manufacturer
From the 1980s, located in the northern part of Jiangxi, Poyang Lake, Tianfangjie Town and diamond segment on the knot, when a graduate of the Zhongnan Institute of Mining and Metallurgy, Li Zhihua, the first in Shenzhen and Singapore businessmen jointly set up a diamond tool factory, inviting Poyang locals, in that early reform and opening up, the diamond tool industry with the rapid development of the stone industry and thrive In the early 20th century, go out of Jiangxi people slowly come back to develop their hometown, diamond segment manufacturers like springing up, gradually occupied a large market at home and abroad, and Jiangxi s knife segment is gradually known
The Principle And Method Of Diamond Segment Process Improvement
The adaptability and applicability of the diamond segment for product cutting comes from the continuous improvement measures of the diamond segment. In addition to the improvement factors of the ratio of various elements of the diamond segment, it also depends on the improvement of the production process of the diamond segment. So what is the diamond segment process? How to make improvements? What is the principle of improvement? This article will explain in detail.
The Role Of Silicon Powder And Silicon Carbide Powder In Diamond Segments
Silicon powder, also known as silicon micropowder, is seldom used in the production of diamond segments, and only a small number of manufacturers are trying to use it, mainly as a binder. However, for the sintered metal material such as diamond segments, the bonding performance is weak. However, silicon carbide powder is a material that is often used for diamond segment processing.
What Should We Do If The Diamond Segment Is Different In Height?
The height of the diamond segment is not a fixed value, and there are often some changes. Especially if there are some operational problems in the production process, this difference will be exacerbated. So why does this happen? How to avoid this situation? How to solve this situation? Let's discuss in detail:
Detailed explanation of diamond segment synthesis process
The diamond segment is a solid structure cutting tool for cutting very hard stone and even steel-concrete materials. Do you know that the raw material of this tool is some metal powder and diamond powder? These powders are sintered by cold pressing and hot pressing to form the diamond segment we see.
What can be added to the iron-based diamond segment to reduce the sintering temperature?
The iron-based diamond segment is a commonly used diamond tool, mainly used for cutting granite and some hard materials. It was found that the iron-based segment would undergo a violent chemical reaction with diamond during the high-temperature sintering process to produce Fe3C, then decomposes into graphite during the subsequent cooling process. This material greatly reduces the holding force of diamond and is not conducive to the subsequent cutting of diamond blades. So how to reduce the hardness of iron-based diamond segments? What about the sintering temperature? This is the question that needs to be discussed in this article.
Effect of sintering temperature on wear resistance of diamond segment
During the use of diamond segments, a phenomenon will be found, that is, when the same diamond segment has the same ratio of raw materials, the cutting efficiency and cutting life of the segment will fluctuate greatly. The magnitude of the fluctuation is within 10%, but under abnormal conditions, the fluctuation will be larger, especially the wear resistance of the diamond segment. It can be directly found that the cutting life has been significantly reduced, so what is the reason for this situation? Woolen cloth? How to solve it? These are the questions to be discussed in this article.
How to improve the quality of diamond segment
In the actual cutting process, the diamond segment has various performances, and the different performances directly reflect the quality of the diamond segmenyt. In order to make the diamond segment have higher cutting performance, the production of the diamond segment manufacturers are constantly improving the quality of the diamond segment.
What should we do if the diamond saw blade is not sharp?
The diamond segment is a kind of diamond tool welded on the base of the saw blade for cutting stone, concrete, asphalt, porcelain drill and other materials, but in the process of cutting, it is often encountered that the diamond segment is not sharp , difficult to cut material, slow cutting process and other problems, so why does these happen? How to solve it?