News-Linsing Diamond Tools

News

2023-07-02

Diamond wire saw static cutting

This article introduces what is diamond wire saw static cutting? Benefits and advantages of static cutting? The difficulty of static cutting and the problems encountered at present introduce the static cutting process of diamond wire saw.

Tags：Wire Saw Rope

2023-07-02

The benefits of degreasing after diamond wire saw tapping

In the production process of diamond wire saw and beading, is drilling and tapping a process that must be experienced? What is tapping? Why does it need to do this step? Why does it need to remove oil stains after tapping? This paper mainly solves the above problems.

Tags：Wire Saw Rope

2023-06-29

Invitation to Vietbuild HCMC(PHASE 3) International Exhibition in 2023

Invitation to Vietbuild HCMC(PHASE 3) International Exhibition in 2023

Tags：Diamond Tools

2023-06-29

Temperature control of high frequency brazed diamond segment

The diamond segment is usually welded to the base of the saw blade by high-frequency brazing. Generally speaking, the welding temperature is the most important factor. If the welding temperature is not enough, the welding will not be strong. If the soldering temperature is too high, there will be bubbling and overheating of the solder, but a good soldering effect will not be obtained. So how to control the high-frequency brazing temperature of different segments? Is there any trick? This article will explain in detail.

Tags：Diamond Cutting Tools Manufacturer Of Diamond Tools

2023-06-29

Comparison between Linxing enhanced diamond wire saw and ordinary wire saw

In order to better improve the cutting efficiency of diamond wire saws, Linxing Diamond Tools has upgraded the ordinary wire saws in all aspects in 2022, and is currently upgrading to enhanced wire saws. Such products have improved life and efficiency. In order to ensure the quality of the product, the specific performance and comparison are as follows:

Tags：Wire Saw Rope

2023-06-29

Diamond wire saw demolition projects and plans

The current main function of diamond wire saw is to demolish steel-concrete buildings, especially some bridges, bridge piers, docks, steel-concrete buildings and other houses. It has the advantages of low noise, high efficiency and strong safety performance. The cutting block has the characteristics of high recycling rate and is currently widely used.

Tags：Wire Saw Rope

2023-06-29

Distribution of diamond wire saw manufacturers in quarrying

Since the application and development of diamond wire saw in the 1970s, it has a history of over 50 years. People have gradually overcome many difficulties and began to proficiently use diamond wire saw in quarrying. Since then, the history of quarrying stone has been changed. So what are the diamond wire saw manufacturers in the world? How is it distributed globally? This article will provide a detailed introduction.

Tags：Quarrying Tools Stone Mining Tools Wire Saw Rope

2023-06-18

What will happen if the density of diamond segment is low?

Diamond segments are processed through three important steps: cold pressing, mold installation, and sintering. During the production process of such diamond segments, low density may occur due to production process or control issues. So if this situation occurs, what impact will it have on the segment? Let's take a look below:

Tags：Segment Production Diamond Tools Production

2023-06-18

Diamond wire saw for quarrying

Diamond wire saw for quarrying is a kind of wire saw used for stone mining. At present, there are three main types: vaccum brazed wire saw, electroplated wire saw and sintered wire saw. What are the characteristics of these wire saws? And how to choose these wire saws? Below we introduce in detail.

Tags：Quarrying Tools Stone Mining Tools Wire Saw Rope

2023-06-18

How to avoid sticking and breaking the diamond wire saw?

The diamond wire saw is a flexible cutting tool, the connection depends on the wire rope in the middle of the wire saw. During the cutting process, the steel wire rope often has the situation of stick, and the occurrence of this situation may greatly lead to the occurrence of rope breakage. So how to avoid the diamond beaded wire saw sticking the rope?

Tags：Wire Saw Rope

2023-06-18

How to choose CNC diamond wire saw?

There are many types of diamond wire saws, among which there is a type of wire saw used in factories, called CNC wire saws, which are mainly used on CNC wire saw machines for squaring & profiling stone blocks and processing special-shaped stones. So how to choose this kind of wire saw? How to choose a better CNC wire saw? Let's take a closer look at it.

Tags：Wire Saw Rope Stone Profiling

2023-06-02

Commonly used diamond segment welding machine types

Diamond segment welding is mainly divided into flame welding, automatic welding, semi-automatic welding, laser welding, etc. So what are the commonly used cutting segment welding equipment? This article will introduce in detail.

Tags：Saw Blade Tips Manufacturer Of Diamond Tools

558 Pre Page 1.. 4 5 6 7 8 9 10 11 12 ..47 Next Page