The diamond segment can’t cut the stone and the stone cutting efficiency is very low are ofter encountered in stone cutting when use the diamond segment Both of these problems are caused by the insufficient sharpness of the segment, so how to improve the sharpness of the diamond segment?

during the first half of the 21st century, everyone in the world has feeling the climate change, environmental protection has been a problem that human beings must face for sustainable existance and development, especially in processing manufacture So what environmental problem should we face when in production and application process of the diamond segment Let’s take a detailed Look

Diamond segments are divided into segments with different base elements according to their formulas And these segments have different cutting performance After a long and lengthy test, four common matrix bonds are widely used at present, namely copper-bond, iron-bond, cobalt-bond and tungsten carbide-bond

Diamond segments were originally used on medium-sized circular saw blades as a tool for cutting stone slate But with the technology development, the segments’ thickness, technology, cutting ability have a great development Therefore, the application and promotion of diamond segments benefit from the advancement of these technologies, and the continuous expansion of the scope of use has greatly promoted and developed the segment industry

The cobalt-based segment will undergo many changes during the sintering process, especially in the natural sintering process, without any pressure, by applying different temperatures and adjusting a reasonable holding time, the segment can be formed naturally

After the diamond diamond segment is sintered, when the mold needs to be disassembled, there will be a case of diamond diamond segment sticking graphite abrasives, and the most obvious performance is that the diamond segment is difficult to disassemble when the mold is disassembled, and the situation that cannot be disassembled is greatly wasted This article details why this can happen and how to handle it

The research and development of diamond segment is a very valuable research project Since the 1980s, many engineers in China have devoted themselves to the research and development of this industry, which has brought about the development of many aspects of science and technology The most direct impact is the research and development of the following projects

There are many types of diamond segments, among which the most common are iron-bond segments, copper-bond segments and cobalt-bond segments, so what are the characteristics of these different types of segments? What is the specific reason for this difference in name? This article will give a detailed description

In the production process of diamond segments, there are mainly the following types of expenditures Most of the cheap segments are not well done in these types of expenditures and expenses In short, it is a series of impacts brought by savings This article allows customers to better understand the "not cheap " of cheap segments through the characteristics of most cheap segments in the market

Diamond segments have a lot of problems in the welding process, especially when a saw blade is welded in the whole disk, whether the welding teeth are on it, the impact on the later cutting, the stability and impact resistance of the bit welding, etc , so what tricks can make the diamond segment welded more tightly?

It needs to pay attention many steps and detailed during the diamond segments choosing process First, we need to choose diamond segments after we confirm that what kind of diamond segments do we need Second, we need to consider that choose what kind of segments can meet the requirements At last, we need to know that how we can do when this segments are not good to use With these basic demands supporting, the diamond segments choosing will be clearly target, in this way it can be helpful for customers to buy more suitable segments products for themself

The welding process of diamond segment for large saw blades is very important, especially for high-frequency welding If the welding is not good, it is easy to cause unstable welding of the cutting segment, and the cutting segment will fall off During the processing in the stone factory, The flying segment is like a bullet, causing damage to some equipment or people This kind of situation occurs frequently, and the welding of the segment will also affect the cutting quality and cutting life of the stone Therefore, it is very important to study the high-frequency welding process