Diamond segments were originally used on medium-sized circular saw blades as a tool for cutting stone slate But with the technology development, the segments’ thickness, technology, cutting ability have a great development Therefore, the application and promotion of diamond segments benefit from the advancement of these technologies, and the continuous expansion of the scope of use has greatly promoted and developed the segment industry

The cobalt-based segment will undergo many changes during the sintering process, especially in the natural sintering process, without any pressure, by applying different temperatures and adjusting a reasonable holding time, the segment can be formed naturally

After the diamond diamond segment is sintered, when the mold needs to be disassembled, there will be a case of diamond diamond segment sticking graphite abrasives, and the most obvious performance is that the diamond segment is difficult to disassemble when the mold is disassembled, and the situation that cannot be disassembled is greatly wasted This article details why this can happen and how to handle it

The research and development of diamond segment is a very valuable research project Since the 1980s, many engineers in China have devoted themselves to the research and development of this industry, which has brought about the development of many aspects of science and technology The most direct impact is the research and development of the following projects

There are many types of diamond segments, among which the most common are iron-bond segments, copper-bond segments and cobalt-bond segments, so what are the characteristics of these different types of segments? What is the specific reason for this difference in name? This article will give a detailed description

In the production process of diamond segments, there are mainly the following types of expenditures Most of the cheap segments are not well done in these types of expenditures and expenses In short, it is a series of impacts brought by savings This article allows customers to better understand the "not cheap " of cheap segments through the characteristics of most cheap segments in the market

Diamond segments have a lot of problems in the welding process, especially when a saw blade is welded in the whole disk, whether the welding teeth are on it, the impact on the later cutting, the stability and impact resistance of the bit welding, etc , so what tricks can make the diamond segment welded more tightly?

It needs to pay attention many steps and detailed during the diamond segments choosing process First, we need to choose diamond segments after we confirm that what kind of diamond segments do we need Second, we need to consider that choose what kind of segments can meet the requirements At last, we need to know that how we can do when this segments are not good to use With these basic demands supporting, the diamond segments choosing will be clearly target, in this way it can be helpful for customers to buy more suitable segments products for themself

The welding process of diamond segment for large saw blades is very important, especially for high-frequency welding If the welding is not good, it is easy to cause unstable welding of the cutting segment, and the cutting segment will fall off During the processing in the stone factory, The flying segment is like a bullet, causing damage to some equipment or people This kind of situation occurs frequently, and the welding of the segment will also affect the cutting quality and cutting life of the stone Therefore, it is very important to study the high-frequency welding process

The diamond segment is composed of two parts: diamond and metal powder, in which the composition of metal powder is very large However, the role of various metals is relatively unknown Let us introduce the role and influence of various metal powders on the quality of diamond segments

Diamond segment has a different shape and it will cause different cutting effect And because the volume of the cutting stone object and the forming process are different, the shape of the segment changes more

In recent years, with the development of super hard materials, more and more new materials have been mass-produced, especially boron carbide, the hardness of Mohs is 9 5, only lower than the natural diamond hardness in nature, in recent years, in the diamond bit to add boron carbide, both can reduce the production cost of the diamond segment, but also increase the cutting life and high temperature resistance of the diamond segment, so the current research on this piece is still continuing