Common problems and solutions in the process of diamond saw blade cutting
Diamond saw blade is a tool commonly used for cutting hard materials, mainly used for cutting construction materials such as stone, concrete, wall, brick, cement, asphalt and so on. People often encounter some problems when using this tool. This article collects and summarizes some specific problems and solutions to facilitate better use of diamond saw blades.
Reasons and solutions for diamond segment to become blunt
Diamond segments will encounter various problems during long-term use, such as the diamond segment becomes blunt and eventually cannot cut stone. This situation is very common, so why does this problem occur? How did the blunt situation arise? What can be done to avoid this kind of problem? How to solve the problem of blunt diamond segment? This article will explain in detail.
What should we do if the diamond saw blade is not sharp?
The diamond segment is a kind of diamond tool welded on the base of the saw blade for cutting stone, concrete, asphalt, porcelain drill and other materials, but in the process of cutting, it is often encountered that the diamond segment is not sharp , difficult to cut material, slow cutting process and other problems, so why does these happen? How to solve it?
Diamond segment detection means
In the production process of diamond segments, various detection methods are often used to judge and detect the quality of the raw materials of diamond segments. It can also be used to judge whether the production process of the diamond segment is in a normal state, and it can also be used to judge the quality stability of the diamond segment. So generally we judge from which aspects? This article needs to address these issues.
How to improve the quality of diamond segment
In the actual cutting process, the diamond segment has various performances, and the different performances directly reflect the quality of the diamond segmenyt. In order to make the diamond segment have higher cutting performance, the production of the diamond segment manufacturers are constantly improving the quality of the diamond segment.
The use of silicon powder in diamond segment
The diamond segment is a segment made of metal bond and diamond sintered by hot pressing. Due to the wide variety of cutting objects and the continuous upgrading of cutting requirements, people have higher and higher requirements for meal bond materials. Therefore, people add various metal or non-metal powders in the research and development process of diamond segment materials. In order to achieve a great breakthrough in the life and efficiency of diamond segments, this article will specifically introduce the use of silicon powder in diamond segments.
Six elements that determine the machining accuracy of diamond segments
Diamond segment is a tool commonly used in stone cutting. In the process of cutting blocks and plates, it often occurs that the cutting accuracy is insufficient, the thickness of the plates is different, or the edge processing is uneven. What determines the precision of diamond machining? How to improve the cutting accuracy of diamond segment? It is the problem to be solved in this paper.
Methods and techniques of re-opening diamond segments
During the cutting process, the diamond segment is prone to become blunt and the stone cannot be cut. Choosing to sharpen the blade again is a common solution, so how to perform the second opening of the saw blade? Let's discuss more details at blow.
What should we do if the diamond segment is not welded firmly?
There are often some welding problems in the welding process of diamond segments, such as falling off segment when welding, unstable welding , bubbling when welding, and uneven between segment and saw blade blank. These are the problems that are often encountered in the welding process. This article mainly introduces the causes and solutions of weak welding during welding.
Reasons and solutions for diamond segments to be blunt
During the use of diamond saw blades, it often happens that the diamond segment does not seem to be able to cut stone. This is especially true when cutting the same kind of stone. Why does this happen? And how to solve this problem? Let's get more details about this.